Leveling & Orienting Your Arable Mark – Arable

After the deployment sequence is complete, check the level and orientation of the device. Press and hold down the button on top of the device for a few seconds until all lights blink blue twice and the Mark will go into leveling mode.

The Mark knows when it is level, but needs your help getting there. If the device is not perfectly level, only two or three LEDs will illuminate. The LED that does not illuminate is the low side. Gently push the device away from the low side until that LED illuminates. A different LED may go dark. Repeat the process until all 4 LEDs are illuminated. Once you are successful, the lights will blink three times to let you know.

Press the button briefly and now the Mark will go into orientation mode. In orientation mode, the light on top of the Arable ‘A’ Logo will start blinking. Mark wants the ‘A’ to point North. As the orientation improves, the light will blink faster. Once it is perfectly aligned, the light will turn solid. After a brief pause, the lights will blink three times to signal that the orientation was successful.

Your Arable Mark is now all set up!

Related articles