When removing your Mark devices from the field, unmount the device by twisting the base and separating it from the device.
Allow the unmounted device 3 minutes with a good cellular connection to send a final "undeploy" message to our servers. (Otherwise we will receive an alert that it stopped syncing, and bother you about it unnecessarily)
Clean the exterior of the device using wet wipes or window cleaner with a soft cloth. Take special care with the clear dome and the white area over the spectrometer and radiometers. If fouling from birds may be a problem, contact us at firstname.lastname@example.org to pre-order a bird-deterrent kit for next season.
Before storing, ensure that both rubber flaps on the underside of the device are tightly closed to seal against moisture.
Store the device, its base, and your other Arable hardware in a dry location that is free of excessive dust.